Specifications Part 1

2 - 2 Dolphin® 9500/9550 Mobile Computer User’s Guide
Image Engine Options and Bar Code Symbologies Supported
Dolphin 9500/9550 terminals may be equipped with one of three image engines options:
• IT4000 SR: red or green aimer option scans from 2.5 to 12.5 in. (6.3 to 32 cm.)
• IT4000 SF: red or green aimer option scans from 2.1 to 8.3 in. (5 to 21 cm.)
1D symbologies supported are: Code 3 of 9, Interleaved 2 of 5, EAN, Codabar, Code 11, Code 128, Code 93, TLC39, Universal
Product Code (UPC), RSS.
2D symbologies supported are: PDF417, MaxiCode, Data Matrix, QR, EAN.UCC, Aztec, Code 49.
Composite codes supported are: RSS-14, CODABLOCK, Aztec Mesa.
OCR codes supported include: OCR A and OCR B.
Postal codes supported include: Postnet and most international 4 state codes, PLANET CODE, BPO 4 STATE, Canadian 4
State, DUTCH POSTAL, AUSTRALIAN 4 STATE, JAPANESE POSTAL.
Using Dolphin 9500/9550 for the First Time
Follow these steps to begin using your Dolphin 9500/9550 terminal.
1. Unpack and check the terminal and documentation.
2. Charge the main battery pack and internal back-up battery.
3. Start the Dolphin mobile computer.
4. Follow the Pocket PC set-up instructions to setup the mobile computer.
5. Verify that the Dolphin 9500/9550 terminal is working properly.
Step 1. Unpack the Carton and Check Its Contents
Inspect the package to see that the following standard items and accessories (if ordered) are included:
• Dolphin 9500/9550 mobile computer
• Battery (7.4v Li-Ion)
• Dolphin 9500/9550 Software Development Kit & User’s Guide CD-ROM
• Microsoft companion CD-ROM
• Dolphin 9500 Quick Start Guide
Note: Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Step 2. Charge the Main Battery and Backup Battery
WARNING Use only battery packs provided by HHP. The use of any other battery pack in the Dolphin 9500/9550 terminal will
void your warranty and may result in damage to the Dolphin terminal or battery.
The terminal’s Li-Ion battery is shipped discharged of all power and must be charged for at least four hours before initial
use.
The battery may be charged using the HomeBase, the serial charging cable, or the USB charging cable.
Charging the Battery Using the HomeBase
1. Place the main battery pack in the Dolphin 9500/9550 terminal.
2. Place the terminal in the terminal well of the Dolphin HomeBase. Time to Charge: Four hours for the main battery; 8 hours
for the back-up battery.
3. Place the battery in the auxiliary well of the HomeBase to charge.
Charging the Battery Using the Serial/USB Charging Cable
Plug in cables to terminal connector, plug adapter into wall outlet
As the main battery pack charges, the internal back-up battery also charges. The back-up battery maintains the RAM and clock
when the terminal’s main battery pack is discharged or removed from the terminal.