Specifications Part 1

Dolphin® 9500/9550 Mobile Computer User’s Guide 2 - 5
Step 4. Align the Screen and Set the Time Zone
Aligning the Screen
You will be prompted to align the screen after a hard reset. Alignment can also be performed by going to Start>Settings and
then choosing ‘Screen’ on the "Systems" tab. Follow the directions on the screen to align the screen:
• After the Welcome splash screen appears, you will be prompted to calibrate the screen. The Dolphin 9500/9550 terminal
displays a cross-hair target and a message to "Tap the target firmly……".
• Use the stylus shipped with your Dolphin mobile computer. Alignment should always be performed with a stylus designed
for touchscreen applications. The small point is required for accurate calibration.
• The stylus should be oriented at a 90 degree angle to the screen surface. Press the stylus firmly into the center of the cross-
hair target and release. Do not "double-tap" the target. You will be prompted to repeat this process for a total of five targets.
• After aligning the screen, follow the directions on the screen which take you through a simple exercise showing how to use
the stylus and pop-up menus.
Tapping the Target
Using Pop-Up Menus