Specifications Part 1

2 - 8 Dolphin® 9500/9550 Mobile Computer User’s Guide
Putting the Dolphin Into Suspend Mode
To conserve power, press the Power key to put the Dolphin terminal into suspend mode. The terminal may also go into “suspend
mode” when it is inactive for a programmed period of time, as defined by your application. Press the SCAN key to wake the
Dolphin terminal from suspend to continue normal operations.
The Dolphin terminal also goes into sleep mode if you remove the main battery pack. To wake the Dolphin terminal from suspend
mode, install a charged battery and press the SCAN key.
WARNING If the main battery and back-up battery are ever fully discharged of power, the terminal will perform a hard
reset when power is restored. The terminal will be restored to its original state. All data stored in RAM memory will be
lost.
Resetting the Dolphin (Hard Reset)
Under some conditions, you may need to reset the Dolphin 9500/9550 terminal with a hard reset. These may include:
• Resetting the operating system
• Resetting the terminal back to factory defaults
• Resetting the terminal after a bootloader, keyboard, and kernel upgrade
To perform a hard reset:
1. Press and hold the Control (CTRL) and the Escape (ESC) keys for approximately 10 seconds.
2. Release the keys and the terminal will reset. The red LED will come on and the green LED will blink for approximately 3
seconds.
3. The terminal will need to be reconfigured. Refer to Start the Dolphin 9500/9550 Mobile Computer on page 2-3.
Resetting the Dolphin (Soft Reset)
There are times when you may need to warm boot the Dolphin 9500/9550 terminal, such as after loading a software application
that requires a warm boot after installing new software. To warm boot the Dolphin 9500/9550 terminal:
1. Press and hold the Control (CTRL) and the SHIFT (SFT) keys for approximately 10 seconds, then release.
2. Release the keys and the terminal will reset. The red LED will come on and the green LED will blink for approximately 3
seconds.
3. The terminal will initialize and after a few seconds will display the Today screen.