Specifications Part 1

3 - 2 Dolphin® 9500/9550 Mobile Computer User’s Guide
Front Panel Features
This section describes features on the Dolphin 9500/9550 terminal front panel.
LEDs
The red light emitting diode (LED) located at the upper right corner of the LCD display is the SCAN LED. This LED illuminates
when the user presses the SCAN key and activates the scan engine. The green LED located at the upper left corner of the LCD
display is the DECODE LED. This LED illuminates when the bar code software successfully decodes a bar code. Both LEDs
are software programmable.
1/4 VGA Display
The Dolphin 9500/9550 screen is a 240 x 320 pixel 1/4 VGA industrial protective lens display. The electroluminescent backlight
allows you to view the display in low light conditions. To conserve power, the backlight may be programmed to automatically
turn off after a prescribed amount of time. The contrast may be adjusted with the contrast keys. The Dolphin 9500/9550 display
is equipped with a touchscreen that can be activated with a stylus or finger.
SCAN Key
DOLPHIN 9500
SCAN
ESC
TAB
SFT
AB
C
E
F
G
I
J
K
M
N
O
S
RQ
UV
W
Y
Z
D
H
L
P
T
X
NUM
ENT
1 2 3
7 8 9
4 5 6
; :
*
@
F1 F2 F3 F4
F5 F6 F7 F8
START INS BKSP DEL
CTRL ALT
SEND
END
POWER
V
O
L
P
G
V
O
L
P
G
+
+
- 0
,
SP
Decode LED
Scan LED
1/4 VGA Color or
Monochrome Touch
Screen Display
Cursor Key
SCAN Key
Keypad
Industrial Mechanical
Connector