Specifications Part 1

5 - 4 Dolphin® 9500/9550 Mobile Computer User’s Guide
Config Tab
The Config tab provides a list of all access points and peer stations associated with the host and a configuration tool that
enables you to create and edit SSID profiles for access points that you want your station to associate with.
Information Fields
Preferred Profiles
A list of preferred profiles for access points (AP) in the network created by the user, or added from the Active SSIDs table is
located at the top of the Config window. When the radio is turned on, it searches for the APs with which to associate in the order
of the listed profiles. For each profile in the table, one can make changes by using the icon tools at top of the table: New, Edit,
Delete, Up, and Down (Operation Buttons on page 5-2). This table is blank after the initial Pegasus software installation. It can
be kept blank with no automatic association preference.
Active SSIDs
The Active SSIDs table lists all access points or peer stations (creator of IBSS) in the vicinity of the host. Each record displays
information for the following six fields (The table may not display all the fields on the screen. Use horizontal scroll bar to check
all):
SSID - Network Name of the access point or peer station. A link icon with signal strength is also shown.
Signal - Signal Strength in percentage for that SSID.
Mode - An icon shows whether it is an access point , or a peer station .
Channel - The channel it uses and the WEP method it applies if any. The icon stands for WEP Key-On, and
for WEP Key-Off.
SupRate - Supported data rate of the access point or the peer station.
BSSID (MAC Addr) - BSSID or MAC Address of the access point or the peer station.
Config Window