Specifications Part 1
Table Of Contents
- Dolphin 9500/9550 Mobile Computer
- Trademarks
- Introduction
- Getting Started
- Dolphin 9500/9550 Overview
- Using the Dolphin 9500/9550 Mobile Computer
- Wireless Communications with Dolphin 9500/ 9550
Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 7
To modify a profile, select (highlight) a profile and click the Edit button and the following screen displays:
The SSID, Type, TX Rate, and Channel fields are unchangeable in AP mode, whereas TX Rate and Channel fields can be
changed in Peer-to-Peer mode.
The information fields and operation buttons are listed as follows:
SSID: to enter an SSID, which is the Network Name.
Check with your network administrator for Network Name (SSID).
Type: Choose from Peer-to-Peer or Access Point in the pull down menu. Access Point mode is also called "Infrastructure" mode.
Peer-to-Peer mode is used for communication between two (or more) radio stations (cards) without an access point.
TX Rate: Choose 1Mb, 2 Mb, Auto 1/2 Mb, 5.5 Mb, 11 Mb, or Fully Auto from the menu. The transmit rate is Fully Automatic by
default.
Chan: Channel. Scroll to select a channel for communication.
WEP block: Used to configure the WEP Key for secure wireless communication. Within the WEP block, WEP Method,
Encryption Key, and Key ID can be configured.
Use Manual Key: Manually input the encryption code for the WEP Key. This is the default setting.
Use Passphrase: Generates an encryption code based on the phrase entered in the window. Not available in this release.
Method: Five options to choose from:
• DisabledWEP Key Off
• 64 bit (HEX) up to 10 characters configurable in Hexadecimal for Encryption Key
• 64 bit (ASCII) up to 5 characters configurable in ASCII for Encryption Key
• 128 bit (HEX) up to 26 characters configurable in Hexadecimal for Encryption Key
• 128 bit (ASCII) up to 13 characters configurable in ASCII for Encryption Key
Note:
HEX, Hexadecimal number set of 16 digits from 0-9 and from A(a)-F(f). ASCII: Any printable ASCII characters.
Encryption Key: Different character set depending on different WEP method and key format.
Key ID: Four options to choose from:
• Key 1 (Default)
•Key 2
•Key 3
•Key 4
Check with your network administrator for security WEP Key and Key ID you need to use.