User Manual Part 3

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 7
Operation buttons
Apply Click the Apply button to associate your station with the SSID you selected.
This SSID can be either from the Preferred Profile table or from the Active SSIDs list. When applied,
the Status tab window displays the status of the wireless connection. If the association failed, a
search for another AP in the Preferred Profile list automatically takes place and the radio attempts to
associate with the station, in order of preference.
Refresh Click the Refresh button to start a new search for all available access points or peer stations in the
vicinity.
To add an Active SSID profile to the Preferred Profile table, complete these steps:
1 Select and highlight an SSID from the Active SSID list.
2 Click Add.
If the SSID has WEP Key-On, the Settings window displays and prompts you to enter the WEP Method, Encryption Key, and
Key ID.
3 Click OK in the Settings window after finishing the configuration. The SSID and its profile are added into the Preferred
Profiles window.
If adding an SSID with WEP Key Off, the Settings window does not display and the SSID is added directly to the Preferred
Profile table when you click the Add button.