User Manual Part 3

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 9
To modify a profile, select one and click the Edit button. The following screen displays:
Note:
The SSID, Type, TX Rate, and Channel fields are unchangeable in AP mode, whereas TX Rate and Channel fields can
be changed in Peer-to-Peer mode.
Network Name & Type
SSID To enter an SSID, which is the Network Name. Check with your network administrator for Network
Name (SSID).
Type Choose from Peer-to-Peer or Access Point in the pull down menu.
Access Point mode is also called “Infrastructure” mode. Peer-to-Peer mode is used for
communication between two (or more) radio stations (cards) without an access point.
TX Rate Choose 1Mb, 2 Mb, Auto 1/2 Mb, 5.5 Mb, 11 Mb, or Fully Auto from the menu. The transmit rate is
Fully Automatic by default.
Chan Channel. Scroll to select a channel for communication.
WEP Used to configure the WEP Key for secure wireless communication. Within this block, you configure
the WEP Method, Encryption Key, and Key ID.
Use Manual Key Manually input the encryption code for the WEP Key. This is the default setting.
Use Passphrase Generates an encryption code based on the phrase entered in the window. Not available in this
release.
Method Select one of the five options from the list:
Note:
HEX, Hexadecimal number set of 16 digits from 0-9 and from A(a)-F(f). ASCII: Any printable ASCII characters.
Encryption Key Different character set depending on different WEP method and key format.
Key ID Choose from the available options:
Disabled WEP Key Off
64 bit (HEX) up to 10 characters configurable in Hexadecimal for Encryption Key
64 bit (ASCII) up to 5 characters configurable in ASCII for Encryption Key
128 bit (HEX) up to 26 characters configurable in Hexadecimal for Encryption Key
128 bit (ASCII) up to 13 characters configurable in ASCII for Encryption Key
Key 1(Default)
•Key 2