User Manual Part 3

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 13
Wireless Personal Area Network Communications with Bluetooth
Setting up Your Bluetooth Card
Note: If you use the Get Connected! Wizard, which is recommended for normal usage, then this step is not necessary. This step
would be used to change the friendly name of your mobile computer.
1 Tap the Bluetooth icon that appears in the task tray .
If you installed OBEX, the menu will also list Transfer via Bluetooth.
2 In the pop-up menu, select Advanced Features, then My Bluetooth Device.
3 In the My Bluetooth Device screen, you can modify the Friendly Name and make any desired configuration changes.
When done, tap OK.
• In normal phone connect operation, Discoverable mode is not needed and should be disabled.
• If you do enable Discoverable mode (e.g., for ActiveSync), note that it does not shut off by itself. To save power, remember
to disable it when not needed.
• Connectable, Use Authentication, and Use Encryption are also not required for printing or dial-up networking applications.
•Check Use Authentication to enable the Use Encryption option.
Assign COM Ports
Follow these steps to view and/or modify the Bluetooth COM ports.
1 Tap on the Bluetooth icon on the Today screen. Select Advanced Features then My Bluetooth Device.
Note: If you installed OBEX, the menu will also list Transfer via Bluetooth.