User Manual Part 3

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 39
6 In the next screen, enter the passkey. Tap Reply.
7 The mobile phone may then either automatically accept the passkey or ask you to enter one. If prompted for a passkey, use
the same one you entered on the mobile computer.
Ericsson T68/T68i only: When the phone asks you if you want to bond, select 2: Add to paired devices. Do not tap ACCEPT.
8 Tap Finish. After successfully connecting, the phone will appear in the Bluetooth Devices folder. In the Today screen, the
Bluetooth icon will also blink. You will not need to run the Get Connected! Wizard again unless you plan to switch between
different phones.
Note: You may also switch between different phones by assigning a new “favorite phone” in the Bluetooth Devices folder.
Motorola Timeport 270C, Nokia 3650/6310/7650/8910/8910i
1 Tap on the Bluetooth task tray icon . In the pop-up menu, select Get Connected!
2 Follow the Bluetooth “Get Connected!” Wizard. In the second screen, use the drop-down list to select your Bluetooth phone.
The wizard will provide tailored instructions for your phone.
Note: The screens below are for the Nokia 7650.
3 As directed in the next two screens, assign the phone a unique name and set the phone in Discoverable mode. Then tap
Next>.
4 The mobile computer will begin to search for the phone. When the search is over, a list of the discovered Bluetooth phones
will appear.
Choose the phone you wish to connect to, and tap Select. A service discovery phase will begin, about 5-10 seconds.