User's Manual

1 - 1
1
Agency Information
Dolphin 9700 terminals meet or exceed the requirements of all applicable standards organizations for
safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to
operate them according to the agency guidelines that follow. Please read these guidelines carefully
before using your Dolphin terminal.
Label Locations
Dolphin 9700
Compliance Label
Laser Safety Label
If the following label is attached to your product, it indicates the product contains an engine with a laser
aimer:
Image Engines with Integrated Laser Aimers
LASER LIGHT. Do not stare into beam.
Class 2 Laser Product.
IEC60825-1: 1993+A1+A2. 1.0 mW MAX
Output: 650nM. Complies with 21 CFR 1040.10
and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Laser Eye Safety Statement: This device has been tested in accordance with and complies with
IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER
PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
Caution! Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.