User's Manual
Table Of Contents
- Dolphin® 9900 Mobile Computer
- Disclaimer
- Trademarks
- Patents
- Other Trademarks
- Agency Information
- Label Locations
- Laser Safety Label
- LED Safety Statement
- Infrared LED Safety Statement
- UL and cUL Statement
- Regulatory and Safety Approvals for all Dolphin Terminals
- Dolphin 9900 802.11b/g (WLAN), Bluetooth, and/or GSM
- FCC Compliance
- Canadian Compliance
- For European Community Users
- Pacemakers, Hearing Aids and Other Electrically Powered Devices
- Microwaves
- Getting Started
- Hardware Overview
- Using Scan Image Engine
- Using Dolphin Keyboards
- Settings
- Wireless Communication
- Working with GSM
- Working with Bluetooth
- Dolphin HomeBase
- Dolphin Mobile Base
- Dolphin ChargeBase
- Dolphin QuadCharger
- Customer Support
7 - 10 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
COM Port Assignment Table
COM Port Assignment
COM Port 1 Serial port. This is the 17-pin connector on the bottom panel of Dolphin terminals.
COM Port 2 Bluetooth Module
If there is no Bluetooth hardware installed on the terminal, this com port is unassigned.
COM Port 3 Raw Infrared
COM Port 4
COM Port 5 USB virtual serial port
COM Port 6 IrDA, if IrDA is enabled.
COM Ports 7-9 Unassigned.
These are available for selection only when connecting to devices that use virtual com
ports, such as Bluetooth.