User's Manual
Table Of Contents
- Dolphin® 9900 Mobile Computer
- Disclaimer
- Trademarks
- Patents
- Other Trademarks
- Agency Information
- Label Locations
- Laser Safety Label
- LED Safety Statement
- Infrared LED Safety Statement
- UL and cUL Statement
- Regulatory and Safety Approvals for all Dolphin Terminals
- Dolphin 9900 802.11b/g (WLAN), Bluetooth, and/or GSM
- FCC Compliance
- Canadian Compliance
- For European Community Users
- Pacemakers, Hearing Aids and Other Electrically Powered Devices
- Microwaves
- Getting Started
- Hardware Overview
- Using Scan Image Engine
- Using Dolphin Keyboards
- Settings
- Wireless Communication
- Working with GSM
- Working with Bluetooth
- Dolphin HomeBase
- Dolphin Mobile Base
- Dolphin ChargeBase
- Dolphin QuadCharger
- Customer Support
Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
8 - 7
Data Communication
You set up data communication via the connections manager. The carrier on the SIM card is the ISP.
System Requirements
• The GSM radio must be enabled; see Enabling the GSM Radio on page 8-3.
• You must have an active SIM card installed; see SIM Card Installation on page 8-2.
• The Phone must not be in use. The in the navigation bar indicates that the GSM phone is active but
the phone is not in use.
Information Requirements
You must have from the SIM card carrier:
• The APN (access point name) number.
• The username and password of the account.
Establishing Data Communication
1. Tap Start > Settings > Connection tab > Connections .
2. Under My ISP, tap Add a new modem connection.
3. Enter a name for the connection,
Select Cellular Line (GPRS) as the modem, and
Tap Next.