User's Manual
Table Of Contents
- Dolphin® 9900 Mobile Computer
- Disclaimer
- Trademarks
- Patents
- Other Trademarks
- Agency Information
- Label Locations
- Laser Safety Label
- LED Safety Statement
- Infrared LED Safety Statement
- UL and cUL Statement
- Regulatory and Safety Approvals for all Dolphin Terminals
- Dolphin 9900 802.11b/g (WLAN), Bluetooth, and/or GSM
- FCC Compliance
- Canadian Compliance
- For European Community Users
- Pacemakers, Hearing Aids and Other Electrically Powered Devices
- Microwaves
- Getting Started
- Hardware Overview
- Using Scan Image Engine
- Using Dolphin Keyboards
- Settings
- Wireless Communication
- Working with GSM
- Working with Bluetooth
- Dolphin HomeBase
- Dolphin Mobile Base
- Dolphin ChargeBase
- Dolphin QuadCharger
- Customer Support
Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
9 - 3
4. You are prompted to enter a passcode.
If the device you are attempting to connect to has a specific passcode, enter it in the Passcode field
and tap Next.
If the device you are attempting to connect to does not have a specific passcode, enter one in the
Passcode field and tap Next.
The Bluetooth radio tries to connect with the device.
5. If you created a passcode, you will be prompted by the other device to enter the same passcode.
Enter the created passcode to establish a connection.
(If you entered a known passcode, you shouldn’t have to do anything on the other device.)
6. When the connection is complete, a list of matching and supported services on that device appears.