User's Manual

2 - 3
Using the Charging/Communication Cables
Use only UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC and
3 amps with the device.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet compo-
nents may cause damage not covered by the warranty.
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied. Do NOT press any keys or interrupt the boot
process. When the boot process is complete, the Home screen appears, and the terminal is ready for
use.
Step 4. Set the Time Zone, Time, and Date
On the Home screen, tap the line that displays the time and date. When the Clock & Alarms screen
appears, tap the arrow to the right of the time zone to open the drop down menu. Select the appropiate
time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save.
!
RS232 Connector
Host Device
Power
Cable
Or
USB Connector
COMM Cable
Plug
Adapter
Cable Cup
Or
RS232, DEX A/V Connector
Dolphin 99EX
Dolphin 99EX
Plug
Adapter
Power
Cable
Client Device
Charging
Cup
P
re
li
m
i
nar
y
Dr
af
t
8/
12
/
1
1
Draft_99EX-UG_Rev-b-1.pdf 19 8/12/2011 4:13:35 PM