User's Manual

3 - 13
• Isopropyl Alcohol wipes (70%)
• CaviWipes
™
• Virex
®
256
•409
®
Glass and Surface Cleaner
• Windex
®
Blue
• Gentle dish soap and water
Batteries
There are three types of battery power: the main battery pack installed in the back panel, the backup
battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal.
They are designed to work together to prevent data loss when the terminal is in use over long periods.
All batteries must be completely charged before using a Dolphin terminal for the first time!
Note: The RTC battery will preserve the Real Time Clock 60 days after the main battery and internal backup battery
are fully depleted.
Main Battery Pack
We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
The standard 3.7 V, 11.3 watt hour Li-poly or extended 3.7 V, 18.5 watt hour Li-ion battery pack is the pri-
mary power source for the terminal.
Charging Options
When the main battery pack is installed in the terminal, use one of the following peripherals:
• Dolphin 99EX HomeBase Device (Model 99EX-HB) (see page 12-1)
• Dolphin 99EX eBase Device (Model 99EX-EHB) (see page 13-1)
• Dolphin 99EX Mobile Base Device (Model 99EX-MB) (see page 14-1)
• Dolphin 99EX ChargeBase Device (Model 99EX-CB) (see page 15-1)
• Dolphin 99EX Net Base Device (Model 99EX-NB) (see page 16-1)
When the main battery pack is not installed in the terminal:
• Place the battery pack in the Dolphin 99EX QuadCharger Device (Model 99EX-QC) (see page 17-1)
• Place the battery pack in the Auxiliary Battery Well of the Dolphin 99EX HomeBase Device (Model
99EX-HB) (see page 12-2) or Dolphin 99EX eBase Device (Model 99EX-EHB) (see page 13-1).
For information on how to remove the main battery pack from the terminal, see Replacing the Main
Battery Pack on page 2-4.
Charging Time
The standard 3.7V Li-poly battery pack requires 4 hours to charge completely before initial use.
The extended 3.7V Li-ion battery pack requires 6 hours to charge completely before initial use.
Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure
the internal backup battery is fully charged.
!
P
re
li
m
i
nar
y
Dr
af
t
8/
12
/
1
1
Draft_99EX-UG_Rev-b-1.pdf 41 8/12/2011 4:13:41 PM