User's Manual

8 - 1

Communication

Connections Menu

The Connections system setting provides access to the terminal’s various wireless communication

options.

Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).

Note: The Dolphin Wireless Manager controls the wireless radios installed in the terminal, see Dolphin Wireless

Manager Window on page 8-6. for additional information.

Icon Tapping this icon…

Beam Enables infrared communication.

See Receiving Data on page 8-3.

Connections Opens Microsoft’s connections manager.

See Connections Manager on page 8-4.

Domain

Enroll

Opens the Enrollment screen for connecting your phone with company resources.

Note: System administrator password is required for domain enrollment.

USB to PC Enables advanced wired USB to PC communication via sync sofware. See

Communication on page 8-8.

Wi-Fi Enables you to configure Wireless Zero Config (WZC).

This icon appears only if the 802.11a/b/g driver is loaded on the terminal and the

Honeywell WLAN Security Supplicant is not loaded.

By default, the Wireless Zero Config is disabled and the supplicant is loaded. This

icon appears only if you removed the supplicant and cold booted the terminal.

Preliminary Draft 1/19/11