User's Manual

18 - 3
Connecting Power to the Rack
1. Plug the power cable into the power connector on the side of the rack, see AC Power Jack on page
18-2.
2. Plug the A/C power cord into a standard wall outlet. The rack is now powered.
Charging the Main Battery
The rack provides power to the Dolphin terminals and allows
the charging of the main batteries in the terminal. The intelli-
gent battery charging system incorporated into all Dolphin
terminals prevents overcharging, which means that Dolphin
terminals may be stored in the rack indefinitely without dam-
age to the terminals, battery packs, or the rack.
To Power a Terminal and Charge its Main Battery
1. Install the main battery pack in the termina; see Install
the Main Battery Pack on page 2-1.
2. Slide the Dolphin terminal into one of the thirty terminal
wells. The terminal screen turns off and the right LED
illuminates orange indicating a properly seated terminal.
Charging begins immediately if required by the Dolphin
terminal.
Make sure the terminal is dry before placing it in the Charge/
Net Rack. Do NOT place a wet terminal in the Charge/Net rack! Doing so may cause damage not covered by
the warranty.
We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
Communication (Net Rack Only)
Software Requirements
Before you connect the Dolphin terminal to the Net rack, make sure you have the most current software
installed. To check the terminal’s system information, tap > Power Tools > SysInfo.
• The Kernel version must be 26.01 or later in terminals running Windows Embedded Handheld 6.5
Classic.
• In terminals running Windows Embedded Handheld 6.5 Professional, the kernel version must be 25.01
or later.
Applications on the Dolphin Terminal
Applications running on the Dolphin terminal when it is connected to the Net rack should be designed
specifically for a partially connected network. For more details, please refer to the
Best Practices for Par-
tially Connected Networks
document available at www.honeywellaidc.com.
!
!
Preliminary Draft 1/19/11