User's Manual

8 - 11
2. Follow the directions on the PC screen. The installation process includes transferring the software to
the terminal.
If the File is Not an Installer:
Some programs cannot be installed on PCs because they are designed for terminals. In these cases, the
appropriate files must be stored on the host PC, transferred via ActiveSync, and installed on the termi-
nal. If an error message stating that the program is valid but designed for a different type of computer
appears during installation, you will know the program cannot be installed on the PC.
1. If you cannot find any installation instructions for the program in the Read Me file or documentation,
open ActiveSync and click Explore.
2. Click on the My Windows Mobile-Based Device folder and copy the program file or files to the
Program Files folder on the terminal.
• If you want the program to be part of the Autoinstall that occurs after every hard reset, place the
program file in the Autoinstall folder (My Windows Mobile-Based Device > IPSM > Honeywell
> Autoinstall).
3. Depending on the program, you may need to open File Explorer on the terminal, navigate to the
folder where the program is located, and tap on the program file to install it.
• If you copied the file to the Autoinstall folder, you can either tap on the program inside the
Autoinstall folder or perform a hard reset and the program will install as part of the Autoinstall
process that occurs during each hard reset. Remember, a hard reset erases RAM data! For more
information, see Hard Reset (Cold Boot) on page 3-17.
After installation on the terminal is complete, tap and the program and its icon appears on the Start
screen. Tap it to open the program.
Adding Programs Directly from the Internet
When selecting programs, verify that the program and version of the program are designed for Windows
Embedded Handheld and your processor. You can verify your processor by tapping
> Settings > System
> About > Version
. Make a note of the information in the Processor field.
1. Determine your device and processor type so that you know which version of the software to install.
Tap > Settings > System > About. On the Version tab, make a note of the information in the
Processor field.
2. Download the program to your device straight from the Internet using Internet Explorer Mobile. You
may see a single EXE or setup.exe file, or several versions of files for different device types and
processors.
3. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4. Tap the file, such as an EXE file. The installation wizard begins. Follow the directions on the screen.
5. Select the radio or radio combination and tap Apply.
The Radio Manager begins enabling your radio or radio combination.
6. When enabled, the Status field reads “Success”.
!!
Preliminary Draft 1/19/11