User's Manual

Chapter 2: Set Up A New Marathon
This page lists a quick outline of the steps you might take when setting up a new Marathon. More instruction for each step is
listed later in this guide. Please refer to the MarathonReference Guide for additional information and instruction.
Contact your representative if you need additional help.
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary,
protect the work surface, the Marathon, and components from electrostatic discharge.
Information in this guide includes instruction for all Marathon operating systems. Differences in operating system instruction
are highlighted as follows:
Windows® 7 Professional
Windows® Embedded Standard
Windows® XP Professional
Hardware Setup
1. Install the hand strap and/or shoulder strap.
2. Provide a power source:
l Attach a fully charged extended battery, or
l Connect a power cable, or
l Place the Marathon in a powered desktop or vehicle mount dock.
3. Press the Power key.
See Also: "Microsoft Windows License Agreement (First Boot)"
Software Setup
Hardware setup should be completed before starting software setup.
1. Set Date and Time
2. Set Power Management
3. Adjust Speaker Volume
4. Pair Bluetooth devices
5. Setup Wireless client parameters - Please refer to the Marathon Reference Guide.
For hardware and software setup instruction not listed here, please refer to the Marathon Reference Guide.
2-1