T5 Wi-Fi Thermostat Programmable Thermostat Quick Install Guide For more information visit yourhome.honeywell.
Included in your box: ••• ••••• •••• ••••••••••• Quick Install Guide Mounting System (UWP) 2
Get the most from T5 Wi-Fi Thermostat Multiple programming options that fit your lifestyle: 1. Location-Based scheduling – The thermostat uses your smartphone’s location to know when you’re away, and saves you energy. Through geofence technology, it senses your return and helps make you comfortable upon arrival. You can always manually change your preset Home and Away temperature either on the thermostat or on the Honeywell Home app. 2.
Tools you will need: Smartphone To install your thermostat and photograph existing wiring. Phillips screwdriver Small flat head screwdriver Pencil Level Home Wi-Fi Password Honeywell Home app To configure your system and connect to your smartphone.
CAUTION: ELECTRICAL HAZARD Can cause electrical shock or equipment damage. Disconnect power before beginning installation. CAUTION: EQUIPMENT DAMAGE HAZARD Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. CAUTION: MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash.
Removing your old thermostat 1 Turn power OFF To protect yourself and your equipment, Turn off the power at the breaker box or switch that controls your heating/ cooling system. OFF O N OF F Switch Breaker box 2 Check that your system is off Change the temperature on your old thermostat. If you don’t hear the system turn on within 5 minutes, the power is off. Note: If you have a digital thermostat that has a blank display, skip this step.
4 Make sure there are no 120/240V wires Do you have thick black wires with wire nuts? Is your thermostat 120V or higher? If you answered yes to either of these questions, you have a line voltage system and the thermostat will not work. If you are unsure visit: yourhome.honeywell.com/support 5 Wire nut Thick black wire Take a picture of how your wiring looks right now Be sure to include the letters next to the terminals where the wires are inserted.
7 Record if you have wires in the following terminals Do not include jumpers as a part of your count. The thermostat does not need jumpers. Terminal Wire Color R Rh Rc 8 Write down the color of the wires Check mark the wires that are connected to terminals. Next to the check mark, write down the color of the wire. Do not include jumpers as a part of your count.
Disconnect the wires and remove the old wa ll plate Use a screwdriver to release wires from term inals.
Installing your T5 Wi-Fi Thermostat T5 Wi-Fi Thermostat Screws UWP Mounting System 10 Anchors Wall
10 Bundle and insert wires through the UWP Pull open the UWP and insert the bundle of wires through the back of the UWP. Make sure at least 1/4-inch of each wire is exposed for easy insertion into the wire terminals. 11 Insert the wall anchors It is recommended that you use the wall anchors included in the box to mount your thermostat. You can use the UWP to mark where you want to place the wall anchors. a) Level the wall plate. b) Mark the location of the wall anchors using a pencil. c) Drill the holes.
Set R-switch position and insert R-wire or wires Set the R-switch up or down based on your wiring notes in Step 7. Insert wires into the inner holes of the terminals on the UWP. The tabs will stay down once the wire is inserted. If you have 1 R-wire (R, Rh, or Rc) 1. Set R-switch to the up position. 2. Insert your R-wire (R, Rh or Rc) into R-terminal. or If you have 2 R-wires (R or Rh, and Rc) 2. Insert your Rc wire into Rc-terminal. 1. Set R-switch to the down position. 3.
Connect remaining wires from Step 8 Tip: Do not mount the UWP to the wall prior to connecting the wires. This wiring is just an example, actual wiring may vary. Depress the tabs to put the wires into the inner holes of their corresponding terminals on the UWP (one wire per terminal) until it is firmly in place. Gently tug on the wires to verify they are secure. Tip: If you need to release the wires again, push down the terminal tabs on the sides of the UWP.
15 Attach your thermostat Align the thermostat onto the UWP and firmly snap it into place. 16 Turn your power ON Turn on the power at the breaker box or switch that controls the heating/ cooling system. ON O N OF F Switch Breaker box 17 Return to the thermostat Return to the thermostat. Confirm the screen shows START SETUP. If it does, continue to “Setup with Honeywell Home App” on page 15. If your thermostat does not show START SETUP, please contact Honeywell support.
Setup with Honeywell Home App 1 Start Setup with the app Touch START SETUP on thermostat. 2 Select to setup with the app Touch Yes on the USE APP screen. No Yes Back 3 Your thermostat is now ready to be configured using the Honeywell Home app a.) Download the “Honeywell Home” app from the App store or Google play. b.) Open the Honeywell Home app. Your thermostat should appear under Thermostat Found. Tap SET UP NOW as shown below to continue.
How to use your Honeywell Home App Thermostat MY HO ME Access the menu 72˚ FO LLOW ING SCHEDULE Set desired temperature 72˚ Select Fan mode Auto/On/Circulate. Select System mode Auto/Heat/ Cool/Off/EM Heat MODE FAN SCHEDULE Schedule your home comfort Interested in more Honeywell products? Visit yourhome.honeywell.com to learn about all available products connected by the Honeywell Home App. App is regularly enhanced and may change.
How to use your T5 Wi-Fi Thermostat Desired temperature Indoor Temperature Adjust temperature Displays desired indoor temperature. Displays current indoor temperature. Touch + or - to set your desired indoor temperature. Mode Heat Mode Fan Auto Menu Fan Mode Menu Fan Select system mode Auto/Heat/Cool/Off/ EM Heat (emergency heat). Contains features: schedule, screen lock, ventilation, Wi-Fi, clean screen, and other thermostat settings. Select Fan mode Auto/On/Circulate.
Manual Setup If your Wi-Fi network is not working, you can alternatively setup your thermostat manually and connect your phone later. 1 Start manual setup Touch START SETUP to begin. 2 Select manual setup On the USE APP screen, touch No. No 3 Yes Navigate and edit setup options Use or to navigate through all the setup options. To see a list of all setup options, go to pages 20-21. To edit an option value, touch Edit or touch text area. The value is now blinking. Use select the correct value.
Manual Setup (cont.) 4 Finish Setup Touch until you see Finish Setup. Touch Select or touch text area. Select 5 Setup Wi-Fi At the end of setup process you will be prompted to SETUP WIFI. If your Wi-Fi is still not working, you have to manually set the time and date. Select No on the SETUP WIFI screen. No Yes Back 6 Set time and date Set daylight saving time if you are in an area that follows daylight saving time. Set date, clock format and time on the next screens.
Equipment Setup Options Option # Option Name 120 200 205 Option Value (factory default in bold) No Schedule MO-SU = Every day the same MO-FR SA SU = 5-1-1 schedule MO-FR SA-SU = 5-2 schedule Each Day = Every day different Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days, temperature setpoints, or to turn Schedule On/ Off, touch MENU from the Home screen and go to SCHEDULE.
Equipment Setup Options Option # Option Name Option Value (factory default in bold) 220 0, 1, 2 Note: Select how many Cool or Compressor stages of your equipment the thermostat will control. Maximum of 2 Cool/Compressor Stages. 221 Cool Stages/ Compressor Stages (#200=Conv./ #200=HP) Heat Stages/ Aux/E Stages (#200=Conv./ #200=HP) Heat Stages: 0, 1, 2 Aux/E stages: 0, 1 Note: Select how many Heat or Aux/E stages of your equipment the thermostat will control.
Frequently Asked Questions Will the T5 Wi-Fi thermostat still work if Wi-Fi connection is lost? Yes, the temperature can be adjusted directly at the thermostat. However, some features, including geofencing, are managed only through the Honeywell Home app and will not function while the connection is down. The thermostat will automatically reconnect to Wi-Fi once the network is restored. The T5 Wi-Fi thermostat is not finding the in home Wi-Fi network. thermostat operates in the 2.4GHz range.
Frequently Asked Questions There is an alert that says Wi-Fi Signal Lost. What does that mean? The Wi-Fi signal to the thermostat has been lost. Wait for the thermostat to reconnect or select a new network within the Honeywell Home app configuration menu. If the thermostat is unable to reconnect, you will need to troubleshoot the router to determine the cause.
FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Apple®HomeKit™ Setup Code The T5 Wi-Fi supports Apple HomeKit. When prompted by the Honeywell Home app, scan the code on the last page (back cover) of this guide. 2-Year Limited Warranty For Warranty information go to yourhome.honeywell.com Home and Building Technologies In the U.S.: Honeywell 715 Peachtree Street NE Atlanta, GA 30308 Wi-Fi®is a registered trademark of Wi-Fi Alliance® yourhome.honeywell.com ®U.S. Registered Trademark. © 2017 Honeywell International Inc. 33-00363ES—01 M.S.