User Manual

Customize thermostat (installer setup)
4
Function Setting
Press ▲ or ▼ to change setting
(see tables on pages 7-9)
Press
NEXT
to display next
function screen
Press DONE to save & exit.
Follow the steps below to begin installer setup. At each function screen,
press
▲ or ▼ to change the setting as desired, then press
NEXT
to advance to
the next function screen.
See tables on pages 7-9 for a description of options for each function.
1
0
Back NextDone
0
1
BackDone Next
To begin, press and hold the
FAN
and ▲ buttons
until the display changes (about 3 seconds).
6
RedLINK™ Installation Guide (TrueZONE™)
FAN
Exit wireless setup
3
Press
CONNECT
at the wireless adapter to exit wireless setup (light should stop
flashing).
Note: The wireles adapter will automatically exit wireless setup after 15 minutes of
inactivity.
Note: If installing more than one zone panel, you must exit wireless setup before installing
an additional zone panel.