User's Manual

EN-26
Using the Zoom Function
This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography,
allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images
appear closer by pressing the button, or smaller away by pressing the button.
Moreover, you can further enlarge the subjects with 4x digital zoom by pressing continuously the
button. It is activated after your camera reaches its maximum optical zoom factor (3x). A useful feature
as it is, however, the more the image is enlarged, the more pixelated the image will appear.
To capture a zoomed image, perform the following steps:
1. Rotate the mode dial to , , , , or and turn your
camera on by pressing the button.
2. Adjust the magnification ratio by using the / button.


 To access the optical zoom function, press the button as
far as it can go. Press it again to activate the digital zoom.


 To exit the zoom photography, press continuously the
button.


 The status of digital magnification is displayed on the LCD
monitor.
3. Compose your scene and press the shutter button.
 To enable digital zoom feature, set the [Set-up1- Digital Zoom] to [On] in the mode.
 As you record movie clips, the zoom function cannot be activated.