User's Manual
EN-49
Connecting to a PictBridge-Compatible Printer
Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge
to perform image selection and printing using the camera monitor screen and controls. DPOF support also
lets you specify which images you want to print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to and turn your camera on by pressing
the button.
2. Press X to select the [Set-up2] menu, then use T to select
[USB Con.]. Press the button.
3. Use S or T to select [PictBridge], then press the button.
4. Connect your camera and the printer via a supplied USB cable.
The screen turns off automatically and the setting screen will
appear on the monitor after seconds of time.
Printing images
When the camera is properly connected to a PictBridge-compatible printer, the [Select Mode] screen is
displayed on the monitor. Use S or T to select the print mode.
In [Print] Mode: Lets you print the specified image with PictBridge.
Step Figure Procedure
1
Use S or T to select the [Print] mode, then press the button.
PictBridge
USB Con.
PC
OK :
2 / 3
PC Camera
Print w/DPOF
Select Mode
Select Mode
Print
Print
Select :
OK :
On Windows 98/98SE/ME/2000, if the camera is connected to your computer and you unintentionally set the camera's
USB connection to PictBridge, the "Install Driver" message will appear. Ignore this message and click "Cancel".