Model 5005/5005B/5005P/5005W STEEL SECURITY SAFE Read this manual carefully and never store it inside the safe!
Model 5005/5005B/5005P/5005W Steel Security Safe with Digital Lock PACKAGE CONTENTS 1 – Steel Security Safe 1 – Operation Manual 2 – Override Access Keys 4 – “AA” Batteries 1 – Mounting Kit w/ Bolts ATTENTION DO NOT RETURN SAFE TO STORE! For missing parts or difficulty operating your safe, please contact our Consumer Assistance Department by telephone. Store will not accept returned products without prior authorization. You must first contact our consumer assistance department.
SETUP STEP 1. OPEN SAFE WITH OVERRIDE KEY 1. Remove override key cover with small screwdriver. 2. Insert override key and turn left to unlock safe. 3. Turn knob to right and open safe door. STEP 2. INSTALL BATTERIES 1. Remove battery compartment (A) cover on inside door. Insert 4 “AA” batteries (included). Ensure the batteries are installed in the correct direction, with regard to polarity (+ and -) See diagram. 2. Replace the battery cover. 3. Do not close door before testing digital lock. STEP 3.
SECURE LOCKOUT PERIODS If a wrong code is entered three times in a row, the digital keypad will begin a fiveminute secure lockout period. During this secure lockout period the keypad will become disabled. Once the lockout period has expired, the safe can be unlocked using the correct passcode. You may use the override key to open safe, but keypad will complete the full lockout period.
ORDERING NEW / REPLACEMENT KEYS The following information is required to order keys: 1. PROOF OF OWNERSHIP (1 of 2 Options Below) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY! • Copy of sales receipt showing Store, Date & Product Description. • Copy of your picture I.D. (Drivers license, passport, regular I.D.). PRODUCT OWNERSHIP VERIFICATION FORM If sales receipt is not available, contact us by email or telephone to request a “Product Ownership Verification Form”. 2.
MOUNTING KIT You may bolt your safe to the wall or floor to added theft protection and resistance to tipping. Your safe has pre-drilled bolt-down holes in the back panel and in the floor. To secure your safe to the wall and/or floor: 1. Select a suitable and convenient location for your safe. 2. Empty the safe and remove the carpet. 3. Locate the predrilled holes on the inside of safe. 4. Place your safe in the desired location. 5. Line up the predrilled holes and mark the floor or wall through the holes.
LIMITED WARRANTY LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of seven (7) years from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period.
CONSUMER ASSISTANCE EMAIL (Best Contact LHLPCustomerService@LHLPinc.com Method): WEBSITE: www.Honeywellsafes.com (Effective April 15, 2013) ADDRESS: Consumer Assistance Dept. LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 USA TELEPHONE: US/Canada 1-877-354-5457 (Toll Free) Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677 to complete your call.