Overview of Primary Product

V5011N TWO-WAY THREADED GLOBE VALVE
7 63-2548—3
CHECKOUT
Use the following procedure to check for proper valve operation:
1. Check valve body and connections for leaks.
IMPORTANT
Before installing linkage (if used) and actuator, make
sure that the valve stem operates freely. Impaired
stem operation can indicate that the body was
twisted or the stem was bent. Either of these
conditions can require valve replacement.
2. After installing linkage and actuator, check operation
according to installation information furnished with these
controls.
3. Operate system through one complete cycle to ensure
valve controls properly.
4. Check valve at regular intervals for leakage around
packing.
NOTE: Packing is spring-loaded and should seldom
require attention.
5. If leakage is discovered and inspection shows that the
packing gland is screwed down tightly, then repack the
valve.
Table 3. Valve Rebuild and Repack Kits.
a
Each 0901116A contains 10 stem buttons.
NOTE: Seat removal tools are required to rebuild valves:
32003941-001 for 1/2 in. through 1-1/4 in. sizes.
32003941-002 for 1-1/2 in. through 2 in. sizes.
Valve OS No. NPT Size (in.)
Flow Capacity (C
v
)
Stem Diameter (in.) Repack Kit Rebuild Kit Stem Button
V5011N1008 1/2 0.73 1/4 0901786A 0901746A
0901116A
a
V5011N1016 1.16 0901747A
V5011N1024 1.85 0901748A
V5011N1032 2.9 0901749A
V5011N1040 4.7 0901750A
V5011N1057 3/4 7.3 0901751A
V5011N1065 1 11.7 0901752A
V5011N1073 1-1/4 18.7 0901753A
V5011N1081 1-1/2 29.3 3/8 0901787A 0901754A
V5011N1099 2 46.8 0901755A
V5011N2006 1/2 0.73 1/4 0901786A 0903422A
V5011N2014 1.16 0903423A
V5011N2022 1.85 0903424A
V5011N2030 2.9 0903425A
V5011N2048 4.7 0903426A
V5011N2055 3/4 7.3 0903427A
V5011N2063 1 11.7 0903428A
V5011N2071 1-1/4 18.7 0903429A
V5011N2089 1-1/2 29.3 3/8 0901787A 0903430A
V5011N2097 2 46.8 0903431A
V5011N3004 1/2 2.9 1/4 0901786A 0901759A
V5011N3012 4.7 0901760A
V5011N3020 3/4 7.3 0901761A
V5011N3038 1 11.7 0901762A
V5011N3046 1-1/4 18.7 0901763A