Safe Manual

2
OPEN COMPRESSION LATCHES (All Models Except 1101)
Press in on small black piece at bottom of latches.
UNLOCK CHEST (All Models)
1. Once latches are open, insert key into
lock cylinder.
2. Turn the key to the right ¼ turn (90º clockwise).
3. Chest is now unlocked and you may lift the lid.
1. 2. 3.
ALWAYS OPEN LID COMPLETLEY (1104 & 1108)
IMPORTANT: To prevent possible injury when
closing, models 1104 and 1108 are equipped
with hydraulic hinges that will close the lid slowly.
Note: Always open the lid completely to activate
the hinges.
LOCK CHEST (All Models)
1. Close lid and insert key into lock cylinder.
2. Turn the key to the left ¼ turn (90º clockwise).
3. Chest is now locked and you may remove
the key.
1. 2. 3.
CLOSE COMPRESSION LATCHES (All Models Except 1101)
1. With chest locked, lift latches and press flat
against chest.
2. Press inwards on latches to ensure latch
is sealed.
1. 2.
LOCATING KEY IDENTIFICATION NUMBERS
KEY NUMBER
3-4 Digit Number etched on the metal collar located around the key hole
IMPORTANT!
Due to airtight seal it is recommended that you occasionally open safe and air it out for at
least 30 minutes to prevent any build up of moisture inside.