User's Guide
Table Of Contents
- Voyager™ 1200g/1202g/1202g-BF User’s Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Cordless System Operation (Voyager 1202g)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- Page Button
- About the Battery
- Voyager 1202g Battery Removal
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Base Charging Modes
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Scanner Power Time-Out Timer
- RangeGate
- Batch Mode
- Scanner Name
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Cordless System Operation (Voyager 1202g-BF)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- About the Instant Charge Pack
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance and Troubleshooting
- Reference Charts
10 - 22
EAN/JAN-13 Default All EAN/
JAN Settings
E13DFT 8-33
Off E13ENA0 8-30
*On E13ENA1 8-30
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA0 8-33
*Do not Convert UPC-A UPAENA1 8-33
EAN/JAN-13 Check Digit Off E13CKX0 8-34
*On E13CKX1 8-33
EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD21 8-34
*2 Digit Addenda Off E13AD20 8-34
5 Digit Addenda On E13AD51 8-34
*5 Digit Addenda Off E13AD50 8-34
EAN/JAN-13 Addenda Required *Not Required E13ARQ0 8-35
Required E13ARQ1 8-34
EAN-13 Beginning with 2 Addenda
Required
* Don’t Require 2 Digit Addenda ARQSY20 8-35
Require 2 Digit Addenda ARQSY21 8-35
EAN-13 Beginning with 290 Addenda
Required
* Don’t Require 5 Digit Addenda ARQ2900 8-35
Require 5 Digit Addenda ARQ2901 8-35
EAN-13 Beginning with 378/379
Addenda Required
* Don’t Require Addenda ARQ3780 8-36
Require 2 Digit Addenda ARQ3781 8-36
Require 5 Digit Addenda ARQ3782 8-36
Require 2 or 5 Digit Addenda ARQ3783 8-36
EAN-13 Beginning with 414/419
Addenda Required
* Don’t Require Addenda ARQ4140 8-36
Require 2 Digit Addenda ARQ4141 8-36
Require 5 Digit Addenda ARQ4142 8-37
Require 2 or 5 Digit Addenda ARQ4143 8-37
EAN-13 Beginning with 434/439
Addenda Required
* Don’t Require Addenda ARQ4340 8-37
Require 2 Digit Addenda ARQ4341 8-37
Require 5 Digit Addenda ARQ4342 8-37
Require 2 or 5 Digit Addenda ARQ4343 8-37
EAN-13 Beginning with 977 Addenda
Required
* Don’t Require 2 Digit Addenda ARQ9770 8-38
Require 2 Digit Addenda ARQ9771 8-38
EAN-13 Beginning with 978 Addenda
Required
* Don’t Require 5 Digit Addenda ARQ9780 8-38
Require 5 Digit Addenda ARQ9781 8-38
EAN-13 Beginning with 979 Addenda
Required
* Don’t Require 5 Digit Addenda ARQ9790 8-38
Require 5 Digit Addenda ARQ9791 8-38
Addenda Timeout Range (0 - 65535) *100 DLYADD##### 8-39
EAN/JAN-13 Addenda
Separator
*Off E13ADS0 8-39
On E13ADS1 8-39
EAN/JAN-13 Redundancy Range (0 - 10) *0 E13VOT## 8-39
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page