User's Guide
Table Of Contents
- Voyager™ 1200g/1202g/1202g-BF User’s Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Cordless System Operation (Voyager 1202g)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- Page Button
- About the Battery
- Voyager 1202g Battery Removal
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Base Charging Modes
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Scanner Power Time-Out Timer
- RangeGate
- Batch Mode
- Scanner Name
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Cordless System Operation (Voyager 1202g-BF)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- About the Instant Charge Pack
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance and Troubleshooting
- Reference Charts
11 - 2
Voyager 1202g and Voyager 1202g-BF Product Specifications
Maximum Power Output
< 1 mw
Embedded Laser
Wavelength
645 - 660 nm
Divergence
< 1.5 mrad. per IEC 60825-1 worst case
Maximum Power Output
10 mw
Parameter Specification
Mechanical
Height
3.6 in. (92mm)
Length
7.1 in. (180mm)
Width
2.6 in. (66mm)
Weight (1202g includes bat-
tery)
6.3 oz. (180g)
Weight (1202g-BF)
5.6 oz. (160g)
Battery (Voyager 1202g Only)
Lithium Ion
1800 mAHr minimum
Number of Scans
Up to 45,000 per charge
Expected Hours of Operation
12
Expected Charge Time
4 hours (external supply)
8 hours (USB power)
Instant Charge Pack (Voyager 1202g-BF Only)
Number of Scans
At least 35 scans with one scan every six seconds
At least 100 scans with one scan every second
Use Time per Full Charge
2-6 minutes depending on use
Expected Full Charge Time
Less than 35 seconds via wall adapter
Less than 90 seconds via USB power
Radio
Frequency
2.4 to 2.5 GHz (ISM Band) Frequency Hopping Bluetooth v.2.1
Range
33 ft. (10 m) typical line of sight
Data Rate
Up to 3 MBps
Environmental
Temperature Ranges
for Voyager 1202g:
Operating - Charging
41° F to +104° F (5° C to 40° C)
Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
Storage
23°F to +95°F (-5°C to 35°C)
Humidity
0 to 95% relative humidity, non-condensing
Temperature Ranges
for Voyager 1202g-BF:
Operating - Charging
32° F to +122° F (0° C to 50° C)
Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
Storage
-4°F to 140°F (-20°C to 60°C)*
*High storage temperature will degrade the performance of the instant charge pack.
Humidity
0 to 95% relative humidity, non-condensing
Mechanical Drop
Designed to withstand 30 drops from 5 feet (1.5m) to concrete
Environmental Sealing
IP42
Parameter Specification