User's Guide
Table Of Contents
- Voyager™ 1200g/1202g/1202g-BF User’s Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Cordless System Operation (Voyager 1202g)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- Page Button
- About the Battery
- Voyager 1202g Battery Removal
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Base Charging Modes
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Scanner Power Time-Out Timer
- RangeGate
- Batch Mode
- Scanner Name
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Cordless System Operation (Voyager 1202g-BF)
- How the Charge and Communications Base Works
- Linking the Scanner to a Base
- Communication Between the Cordless System and the Host
- RF (Radio Frequency) Module Operation
- System Conditions
- About the Instant Charge Pack
- Flash Updates
- Beeper and LED Sequences and Meaning
- Reset Scanner
- Scanning While in Base Cradle
- Paging
- Scanner Address
- Base Address
- Scanner Modes
- Unlinking the Scanner
- Override Locked Scanner
- Out-of-Range Alarm
- Using the Scanner with Bluetooth Devices
- Minimizing Bluetooth/ISM Band Network Activity
- Reset Scanner and Base
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance and Troubleshooting
- Reference Charts
11 - 4
CCB00-010BT-01N-BF Product Specifications
Frequency
2.4 to 2.5 GHz (ISM Band) Frequency Hopping Bluetooth v.2.1
Range
33 ft. (10 m) typical (line of sight)
Data Rate
Up to 3 MBps
Temperature Ranges:
Operating - Charging
41° F to +104° F (5° C to 40° C)
Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
Storage*
23°F to +95°F (-5°C to 35°C)
Humidity
0 to 95% relative humidity, non-condensing
Environmental
Mechanical Drop
Operational after 30 drops from 3.28 feet
(1m) to concrete
ESD Sensitivity
16kV air
9kV contact
Parameter Specification
Mechanical
Dimensions (Typical):
Height
3.8 inches (97mm)
Length
7.9 inches (200mm)
Width
2.6 inches (67mm)
Weight
7.6 oz (216g)
Electrical
Input Voltage
5 volts +5%
Operating Power - Charging
5W (1A@5V) (external supply)
2.5W (0.5A@5V) (USB power)
Typical Non-Charging Power
Base with scanner
1W (0.2A@5V)
Base, no scanner
0.5W (0.1A@5V)
Suspend Mode
0.0125W (0.0025A@5V)
Expected Full Charge Time
<35s (external supply)
<90s (USB power)
Radio
Frequency
2.4 to 2.5 GHz (ISM Band) Frequency Hopping Bluetooth v.2.1
Range
33 ft. (10 m) typical (line of sight)
Data Rate
Up to 3 MBps
Temperature Ranges:
Operating - Charging
32° F to +122° F (0° C to 50° C)
Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
Storage*
-4°F to 140°F (-20°C to 60°C)
*High storage temperature will degrade the performance of the instant charge pack.
Humidity
5 to 95% relative humidity, non-condensing
Environmental
Mechanical Drop
Operational after 30 drops from 3.28 feet
(1m) to concrete
ESD Sensitivity
16kV air
9kV contact