Quick Start Guide
Table Of Contents
- Voyager™ 1202g
- Getting Started
- Power Supply Assembly (if included)
- USB Connection
- RS232 Serial Port Connection
- RS485 Connection
- Keyboard Wedge Connection
- Reading Techniques
- Standard Product Defaults
- RS485 Interface
- Keyboard Country
- Locked Link
- Override Locked Scanner
- Unlinking the Scanner
- Out-of-Stand Modes/CodeGate® Activation
- Reread Delay
- Suffix
- Add Code ID Prefix to all Symbologies
- Data Format Editor Instructions
- 1. Scan the Enter Data Format symbol.
- 2. Primary/Alternate Format: scan 0 for Primary Format
- 3. Terminal Type: scan 099 for any terminal type
- 4. Code I.D.: scan 99 for any bar code type
- 5. Length: scan 9999 for any length bar code.
- 6. Editor commands: use the Programming Chart that follows.
- 7. Scan Save to save your entries.
- Programming Chart
- Changing a Scanner Battery
- EZConfig-Scanning
- Technical Assistance
- Limited Warranty
- User Documentation
- Patents
- Disclaimer
Locked Link
If you link a scanner to a base using the Locked Link Mode, other
scanners are blocked from being linked if they are inadvertently
placed into the base. If you do place a different scanner into the
base, it will charge the scanner, but the scanner will not be linked.
To use a different scanner, you need to unlink the original scanner by
scanning the Unlink Scanner bar code, below.
Override Locked Scanner
If you need to replace a broken or lost scanner that is linked to a
base, scan the Override Locked Scanner bar code with a new
scanner, and place that scanner in the base. The locked link will be
overridden; the broken or lost scanner’s link with the base will be
removed, and the new scanner will be linked.
Unlinking the Scanner
If the base has a scanner linked to it, that scanner must be unlinked
before a new scanner can be linked. Once the previous scanner is
unlinked, it will no longer communicate with the base. Scan the
Unlink Scanner bar code to unlink a scanner.
Locked Link Mode
(Single Scanner)
Override Locked Scanner
Unlink Scanner