User Manual
Table Of Contents
- Voyager 1250g User's Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- ISBT 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN-13 Beginning with 2 Addenda Required
- EAN-13 Beginning with 290 Addenda Required
- EAN-13 Beginning with 378/379 Addenda Required
- EAN-13 Beginning with 414/419 Addenda Required
- EAN-13 Beginning with 434/439 Addenda Required
- EAN-13 Beginning with 977 Addenda Required
- EAN-13 Beginning with 978 Addenda Required
- EAN-13 Beginning with 979 Addenda Required
- ISBN Translate
- ISSN Translate
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Interface Keys
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance
- Customer Support
- Reference Charts
- Sample Symbols
- Programming Chart
9 - 29
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 6-12
*Off N25ENA0 6-12
On N25ENA1 6-12
NEC 2 of 5 Check
Digit
*No Check Char. N25CK20 6-13
Validate, But Don’t
Transmi t
N25CK21 6-13
Validate, and
Transmi t
N25CK22 6-13
NEC 2 of 5
Redundancy
Range (0 - 10) *0 N25VOT## 6-13
NEC 2 of 5 Message
Length
Minimum (1 - 80) *3 N25MIN## 6-13
Maximum (1 - 80)
*80
N25MAX## 6-13
Code 93 Default All Code 93
Settings
C93DFT 6-14
Off C93ENA0 6-14
*On C93ENA1 6-15
Code 93
Redundancy
Range (0 - 10) *0 C93VOT## 6-14
Code 93 Message
Length
Minimum (1 - 80) *3 C93MIN## 6-15
Maximum (1 - 80)
*80
C93MAX## 6-15
Straight 2 of 5
Industrial
Default All Straight 2
of 5 Industrial
Settings
R25DFT 6-15
*Off R25ENA0 6-15
On R25ENA1 6-15
Straight 2 of 5
Industrial
Redundancy
Range (0 - 10) *0 R25VOT## 6-16
Straight 2 of 5
Industrial Message
Length
Minimum (1 - 80) *3 R25MIN## 6-16
Maximum (1 - 80)
*80
R25MAX## 6-16
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page