User Manual
Table Of Contents
- Voyager 1250g User's Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- ISBT 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN-13 Beginning with 2 Addenda Required
- EAN-13 Beginning with 290 Addenda Required
- EAN-13 Beginning with 378/379 Addenda Required
- EAN-13 Beginning with 414/419 Addenda Required
- EAN-13 Beginning with 434/439 Addenda Required
- EAN-13 Beginning with 977 Addenda Required
- EAN-13 Beginning with 978 Addenda Required
- EAN-13 Beginning with 979 Addenda Required
- ISBN Translate
- ISSN Translate
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Interface Keys
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance
- Customer Support
- Reference Charts
- Sample Symbols
- Programming Chart
9 - 40
MSI Check Character *Validate Type 10,
but Don’t Transmit
MSICHK0 6-58
Validate Type 10 and
Transmi t
MSICHK1 6-58
Validate 2 Type 10
Chars, but Don’t
Transmi t
MSICHK2 6-58
Validate 2 Type 10
Chars and Transmit
MSICHK3 6-58
Validate Type 10
then Type 11 Char,
but Don’t Transmit
MSICHK4 6-58
Validate Type 10
then Type 11 Char
and Transmit
MSICHK5 6-58
Disable MSI Check
Characters
MSICHK6 6-58
MSI Redundancy Range (0 - 10) *0 MSIVOT## 6-58
MSI Message Length Minimum (1 - 80) *3 MSIMIN## 6-59
Maximum (1 - 80)
*80
MSIMAX## 6-59
Plessey Code Default All
Plessey Code
Settings
PLSDFT 6-59
Off PLSENA0 6-59
*On PLSENA1 6-59
Plessey Check Char. *No Check Char. PLSCHK0 6-60
Validate, But Don’t
Transmi t
PLSCHK1 6-60
Validate,
and Transmit
PLSCHK2 6-60
Plessey Redundancy Range (0 - 10) *0 PLSVOT## 6-60
Plessey Message
Length
Minimum (1 - 80) *3 PLSMIN## 6-60
Maximum (1 - 80)
*80
PLSMAX## 6-60
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page