User Manual
Table Of Contents
- Voyager 1250g User's Guide
- Table of Contents
- Getting Started
- Programming the Interface
- Introduction
- Programming the Interface - Plug and Play
- USB Serial Commands
- Verifone® Ruby Terminal Default Settings
- Gilbarco® Terminal Default Settings
- Honeywell Bioptic Aux Port Configuration
- Datalogic™ Magellan© Bioptic Aux Port Configuration
- NCR Bioptic Aux Port Configuration
- Wincor Nixdorf Terminal Default Settings
- Wincor Nixdorf Beetle™ Terminal Default Settings
- Wincor Nixdorf RS232 Mode A
- Keyboard Country Layout
- Keyboard Wedge Modifiers
- RS232 Modifiers
- NCR Modifiers
- Scanner to Bioptic Communication
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- All Symbologies
- Message Length Description
- Codabar
- Code 39
- Interleaved 2 of 5
- NEC 2 of 5
- Code 93
- Straight 2 of 5 Industrial (three-bar start/stop)
- Straight 2 of 5 IATA (two-bar start/stop)
- Matrix 2 of 5
- Code 11
- Code 128
- ISBT 128
- GS1-128
- Telepen
- UPC-A
- UPC-A/EAN-13 with Extended Coupon Code
- UPC-E0
- EAN/JAN-13
- EAN-13 Beginning with 2 Addenda Required
- EAN-13 Beginning with 290 Addenda Required
- EAN-13 Beginning with 378/379 Addenda Required
- EAN-13 Beginning with 414/419 Addenda Required
- EAN-13 Beginning with 434/439 Addenda Required
- EAN-13 Beginning with 977 Addenda Required
- EAN-13 Beginning with 978 Addenda Required
- EAN-13 Beginning with 979 Addenda Required
- ISBN Translate
- ISSN Translate
- EAN/JAN-8
- MSI
- Plessey Code
- GS1 DataBar Omnidirectional
- GS1 DataBar Limited
- GS1 DataBar Expanded
- Trioptic Code
- GS1 Emulation
- Postal Codes
- Interface Keys
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance
- Customer Support
- Reference Charts
- Sample Symbols
- Programming Chart
9 - 19
LED Settings *Red LED Off LEDFN10 3-6
Green LED Off LEDFN20 3-6
Red LED On with
Good Scan
LEDFN11 3-6
*Green LED On with
Good Scan
LEDFN21 3-6
Red LED On with
Laser
LEDFN12 3-6
Green LED On with
Laser
LEDFN22 3-6
Red LED On when
CodeGate Disabled
LEDFN14 3-6
Green LED On
when CodeGate
Disabled
LEDFN24 3-6
Red LED On when
In-Stand
LEDFN18 3-6
Green LED On
when In-Stand
LEDFN28 3-6
Red LED On with
CTS
LEDFN1128 3-7
Green LED On with
CTS
LEDFN2128 3-7
LED Brightness Red Off LEDIN10 3-7
Green Off LEDIN20 3-7
Red Low LEDIN11 3-7
Green Low LEDIN21 3-7
Red Medium LEDIN12 3-7
Green Medium LEDIN22 3-7
*Red High LEDIN13 3-7
*Green High LEDIN23 3-7
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page