User Manual
Table Of Contents
- Hyperion 1300g User's Guide
- Getting Started
- Programming the Interface
- Input/Output Settings
- Data Editing
- Data Formatting
- Symbologies
- Introduction
- All Symbologies
- Codabar Start / Stop Characters
- Codabar Check Character
- Codabar Concatenation
- Codabar Message Length
- Code 39 Start / Stop Characters
- Code 39 Check Character
- Code 39 Message Length
- Code 39 Append
- Full ASCII
- Code 39 Code Page
- Check Digit
- Interleaved 2 of 5 Message Length
- Code 93 Message Length
- Code 93 Code Page
- Straight 2 of 5 Industrial Message Length
- Straight 2 of 5 IATA Message Length
- Matrix 2 of 5 Message Length
- Check Digits Required
- Code 11 Message Length
- ISBT 128 Concatenation
- Code 128 Message Length
- Code 128 Code Page
- Code 128 Function Code Transmit
- Telepen Output
- Telepen Message Length
- UPC A Check Digit
- UPC A Number System
- UPC A Addenda
- UPC A Addenda Required
- UPC A Addenda Separator
- UPC E0 and UPC E1
- UPC E0 and UPC E1 Expand
- UPC E0 and UPC E1 Addenda Required
- UPC E0 and UPC E1 Addenda Separator
- UPC E0 Check Digit
- UPC E0 Number System
- UPC E0 Addenda
- EAN/JAN 13 Check Digit
- EAN/JAN 13 Addenda
- EAN/JAN 13 Addenda Required
- EAN/JAN 13 Addenda Separator
- ISBN Translate
- EAN/JAN 8 Check Digit
- EAN/JAN 8 Addenda
- EAN/JAN 8 Addenda Required
- EAN/JAN 8 Addenda Separator
- MSI Check Character
- MSI Message Length
- Plessey Message Length
- GS1 DataBar Expanded Message Length
- Korea Post Message Length
- Codablock F Message Length
- Code 49 Message Length
- Interface Keys
- Utilities
- Serial Programming Commands
- Product Specifications
- Maintenance
- Customer Support
10 - 1
10
Product Specifications
Hyperion 1300g Product Specifications
Parameter Specification
Mechanical
Height
5.9 inches (15 cm)
Length
4.4 inches (11.2 cm)
Width
3.1 inches (7.9 cm)
Weight
5.6 ounces (160 g)
Electrical
LED source
630 nm visible red LED
Input Voltage
4.5-5.5VDC at imager
Operating Power
200mA @ 5V
Standby Power
125mA @5V
Environmental
Operating Temperature
32 F to +122 F (0 C to +50 C)
Storage Temperature
-40 F to +140 F (-40 C to +60 C)
Humidity
0 to 95% non-condensing
Drop
Operational after 50 drops from 5 feet
(1.5 m) to concrete
Environmental Sealing
IP41
Light Levels
70,000 lux
ESD
15 kV to any external surface
Sealant Rating
IP41
Scan Performance
Scan Pattern
Single Line
Motion Tolerance
20 inches (51 cm) per second
Scan Rate
Up to 270 scans per second
Print Contrast
20%
Pitch, Skew
65
Decode Capabilities
Reads standard 1D and GS1 DataBar
symbologies
Optional External Power Supply
Requirements
Use only a Listed Limited Power Source (LPS) or
Class 2 type power supply with output rated 5 to
5.2Vdc, 1A