Install Instructions

14004932-001 VP VALVE ADAPTER
62-0163-01 2
3. Rotate cover counterclockwise, remove and
discard.
NOTE: Rotating the cover can require that you press
while turning.
4. If the main spring is green, skip to step 6.
5. Replace existing spring with the green spring, included
in kit.
6. Attach the adapter cover to the actuator.
7. Ensure that the cover and actuator peg are aligned.
8. Insert the peg into the cover.
9. Only the tapered portion of the metal adapter stem
should protrude above the rest of the adapter. If this is
not the case, rotate the
hexagonal portion of the adapter:
a. clockwise: to lower the stem.
b. counterclockwise: to raise the stem.
10. Pull the hexagonal portion of the adapter straight off of
the adapter and discard it.
11. Attach and wire the actuator according to the
instructions included with the device.
Fig. 1. Cover peg removal.
M17502
VP527