Datasheet

ManualsBrandsHoneywell ManualsAutomationLimit Switch, Roller Plunger, 1CO, Snap Action

DESCRIPTION

All MICRO SWITCH™ 14CE Series miniature precision switches

incorporate ﬂuorocarbon diaphragm sealing to provide reliable

protection, meeting IP65, IP66, IP67, and IP68, as well as

NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13 requirements. Versions with

a boot seal also meet NEMA 12 requirements (dust, falling dirt,

liquid media with solid contaminates). The cable or connector

and basic switch terminals are encapsulated in an epoxy

sealant, offering excellent resistance in harsh environments.

For low temperature applications (down to 40 °C, 40 °F), CE

Series switches can be supplied with low temperature seals

and lubricant.

The CE Series switches are rugged and versatile switches

which can be applied indoors in many harsh factory ﬂoor

applications, as well as on outdoor equipment in extreme

temperatures. A full range of actuators are available, including

pin plungers, roller plungers, side rotary, multi-directional wire,

and manually operated. The switches are also available with

the industry standard, M12 micro-change 4-pin connector.

MICRO SWITCH 14CE products meet European and Asian CE

requirements.

VALUE TO CUSTOMERS

• Big performance in a small package

• Delivers consistent performance in many demanding

environments where petroleum, synthetic, or water based

ﬂuids are present

• Product variation within deﬁned nomenclature

FEATURES

• Rugged, miniature construction means minimal real estate

on equipment

• NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13, and

IP65/66/67/68 environmental sealing

• Pre-leaded (Cenelec cable) or supplied with a M12 four-pin

connector

• Wide selection of actuators and cable length variations with

side and bottom exit cable/connector options

• 25 mm mounting centers engineered with a MICRO SWITCH

SM switch for consistent, precise actuation

• Well suited for up to 10 million actuation cycles (Up to 5

million actuation cycles for wobble actuators)

• Gang mounting capability to provide a multi-plunger limit

switch

• Low temperature variants available for indoor and outdoor

applications

• CE approvals for European and Asian use

POTENTIAL APPLICATIONS

• Machine tools

• Off-road equipment

• Material handling

• Access and mobility solutions

• Textile machinery

• Robotics

• Packaging equipment

• Commercial appliances

• Print trade machinery

• Agricultural machinery

DIFFERENTIATION

• Diaphragm seal between the actuator and the switch cavity

for high performance sealing

• CE Series incorporates MICRO SWITCH SM basic switch for

consistent, precise actuation

• Side exit termination for space constraints

PORTFOLIO

Honeywell’s MICRO SWITCH 14CE limit switch is part of a

comprehensive offering of rugged and reliable limit switches.

To view the entire product portfolio, click here.

Sensing and Internet of Things

Datasheet

MICRO SWITCH Miniature Precision Limit Switches

14CE Series

002387

Issue 5

Summary of content (9 pages)

PAGE 1
MICRO SWITCH Miniature Precision Limit Switches 14CE Series 002387 Issue 5 Datasheet FEATURES DESCRIPTION All MICRO SWITCH™ 14CE Series miniature precision switches incorporate fluorocarbon diaphragm sealing to provide reliable protection, meeting IP65, IP66, IP67, and IP68, as well as NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13 requirements. Versions with a boot seal also meet NEMA 12 requirements (dust, falling dirt, liquid media with solid contaminates).
PAGE 2
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series Table 1.
PAGE 3
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series SWITCHING AND LEAD IDENTIFICATION 14CE GREEN/YELLOW SPDT BROWN 2 1 = Common 2 = Normally Closed 3 = Normally Open GREY 1 3 BLACK NC 2 PINOUTS NO 3 Connector - (dc) (-Q) 1C Connector (ac) (-Q1) NO 3 1C NC 2 1C NO 3 NC 2 NO 3 1C CONNECTOR VERSIONS MOUNTING The 14CE Series is available with a 4-pin, M12 size connector in MICRO SWITCH 14CE Series switches are mounted by using two M5 screws.
PAGE 4
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series GENERAL DIMENSIONS • ALL SWITCHES CABLE VERSION 40 mm max. [1.57 in max.] 16 mm max. [0.63 in max.] 25 mm [0.98 in] Two (2) holes Ø 5.1 mm [Ø 0.2 in] dia. c/bore 10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep] (Both sides - option “A” only) Pretravel (PT) Overtravel (OT) 3 mm min. [0.12 in min.] Max. free length Operating position (OP) 7,6 mm [0.30 in] M12 thread 44 mm max. [1.73 in max.
PAGE 5
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings 14CE1 • Pin Plunger 14CE27 • Pin Plunger Panel Mount PT OT FP OP 17,5 GRY-BRN GRY-BLK GRY-BLK GRY-BRN 15,7 12,7 Ø10,0 mm [Ø0.39 in] 15,8 Pretravel • 1,8 mm [0.071 in] Diff. travel • 0,1 mm [0.004 in] Overtravel • 3,0 mm [0.118 in] Oper. force • 11,8 N [2.
PAGE 6
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series 14CE2 • Roller Plunger 14CE28 • Roller Plunger Panel Mount Ø12,4 mm [Ø0.49 in] PT FP OP 30,3 GRY-BRN GRY-BLK GRY-BLK GRY-BRN 28,5 28,6 Pretravel • 1,8 mm [0.071 in] Diff. travel • 0,1 mm [0.004 in] Overtravel • 3,0 mm [0.118 in] Oper. force • 11,8 N [2.
PAGE 7
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series 14CE55 • Boot Sealed Cross Roller Plunger BOOT SEAL PT OT FP OP 34,4 31,4 36,2 GRY-BRN GRY-BLK GRY-BLK GRY-BRN ROLLER Ø 12,4 mm x 4,7 mm Ø 0.48 in x 0.020 in] 0° GRY-BRN GRY-BLK GRY-BLK GRY-BRN OT DT PT OT DT 18,9 mm [0.74 in] Actuator shaft Ø7,32 mm [Ø0.288 in] 30° 70° OP ALL DIRECTIONS EXCEPT DIRECT PULL 0 335,0 mm max. [13,98 mm max.
PAGE 8
MICRO SWITCH Miniature Precision Limit Switches, 14CE Series Table 3. Levers for Use with 14CE Side Rotary Switches Catalog Listing Roller Material Roller Dia. mm [in] Roller Width mm [in] Fixed length lever; 38,1 mm [1.5 in] radius GLZ51A Nylon 19,0 [0.75] 6,35 [0.25] GLZ51B Steel 19,0 [0.75] 6,35 [0.25] GLZ51C Nylon 25,4 [1.00] 12,7 [0.50] GLZ51E Bronze 19,0 [0.75] 6,35 [0.25] GLZ51T SST 19,0 [0.75] 9,5 [0.38] Fixed length offset lever; 38,1 mm [1.
PAGE 9
m WARNING ADDITIONAL MATERIALS PERSONAL INJURY • Product installation instructions DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.