User's Guide

HH1800 User Guide 113
EAN-13 Beginning with 977 Addenda Required
This setting programs the scanner to require a 2 digit addenda only on EAN-13 barcodes that
begin with “977.” The following settings can be programmed:
Require 2 Digit Addenda: All EAN-13 barcodes that begin with “977” must have a 2 digit
addendum. The EAN-13 barcode with the 2 digit addendum is then transmitted as a single,
concatenated barcode. If a 2 digit addendum is not found within the Addenda Timeout
period, the EAN-13 barcode is discarded.
Don’t Require 2 Digit Addenda: If you have selected Require 2 Digit Addenda, and you want
to disable this feature, scan Don’t Require 2 Digit Addenda. EAN-13 barcodes are
transmitted, depending on the setting you are using for EAN/JAN-13 Addenda Required.
Default = Don’t Require 2 Digit Addenda.
* Don’t Require 2 Digit Addenda
Require 2 Digit Addenda
EAN-13 Beginning with 978 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13 barcodes
that begin with “978.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with “978” must have a 5 digit
addendum. The EAN-13 barcode with the 5 digit addendum is then transmitted as a single,
concatenated barcode. If a 5 digit addendum is not found within the Addenda Timeout
period, the EAN-13 barcode is discarded.
Don’t Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda, and you want
to disable this feature, scan Don’t Require 5 Digit Addenda. EAN-13 barcodes are
transmitted, depending on the setting you are using for EAN/JAN-13 Addenda Required.
Default = Don’t Require 5 Digit Addenda.
* Don’t Require 5 Digit Addenda