User's Guide

128 HH1800 User Guide
* On
Off
QR Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description
(page 82) for additional information. Minimum and Maximum lengths = 1-7089. Minimum
Default = 1, Maximum Default = 7089.
Minimum Message Length
Maximum Message Length
QR Code Append
This function allows the scanner to append the data from several QR Code barcodes together
before transmitting them to the host computer. When the scanner encounters an QR Code
barcode with the append trigger character(s), it buffers the number of QR Code barcodes
determined by information encoded in those barcodes. Once the proper number of codes is
reached, the data is output in the order specified in the barcodes. There are 3 ways to scan
appended QR Code:
One Scan: Pull the trigger one time and all appended QR Codes in the same image are
decoded.
Swipe: Pull and hold down the trigger and scan all appended QR Codes while keeping the
trigger pressed. The scanner emits short beeps for each partial QR Code that is scanned and
buffered. One long beep is emitted after the last QR Code is scanned and the data is
complete. Not compatible with Presentation mode.
Point and Shoot: Pull the trigger one time for each image. The scanner emits a short beep for
each partial QR Code that is scanned and buffered. One long beep is emitted after the last QR
Code is scanned and the data is complete. Not compatible with Presentation mode.
Default = One Scan.
* One Scan