User's Guide

HH1800 User Guide 135
Aztec Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description
(page 82) for additional information. Minimum and Maximum lengths = 1-3832. Minimum
Default = 1, Maximum Default = 3832.
Minimum Message Length
Maximum Message Length
Aztec Append
This function allows the scanner to append the data from several Aztec barcodes together
before transmitting them to the host computer. When the scanner encounters an Aztec
barcode with the append trigger character(s), it buffers the number of Aztec barcodes
determined by information encoded in those barcodes. Once the proper number of codes is
reached, the data is output in the order specified in the barcodes. Default = On.
* On
Off
Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the data received
does not display with the proper characters, it may be because the barcode being scanned
was created using a code page that is different from the one the host program is expecting. If
this is the case, scan the barcode below, select the code page with which the barcodes were
created (see ISO 2022/ISO 646 Character Replacements on page 208), and scan the value and
the Save barcode from the Programming Chart, beginning on page 211. The data characters
should then appear properly.
Aztec Code Page