User's Guide

HH1800 User Guide 5
CHAPTER 2 - PROGRAM THE INTERFACE
Introduction
This chapter describes how to program your system for the desired interface.
Program the Interface - Plug and Play
Plug and Play barcodes provide instant scanner set up for commonly used interfaces.
Note:
After you scan one of the codes, power cycle the host terminal to have the interface in effect.
RS232 Serial Port
The RS232 Interface barcode is used when connecting to the serial port of a PC or terminal.
The following RS232 Interface barcode also programs a carriage return (CR) and a line feed
(LF) suffix, baud rate, and data format as indicated below. It also changes the trigger mode to
manual.
Option
Setting
Baud Rate
115,200 bps
Data Format
8 data bits, no parity bit, 1 stop bit
RS232 Interface
2
CHAPTER