User's Guide

HH1800 User Guide 7
USB HID
Scan the following code to program the scanner for USB HID Barcode scanners.
USB HID Barcode Scanner
USB Serial
If you are using a Microsoft® Windows® PC, you will need to download the latest driver from
the Honeywell website (www.honeywellaidc.com) and go to Get Resources - Downloads -
Software. The driver will use the next available COM Port number. Apple® Macintosh
computers recognize the scanner as a USB CDC class device and automatically use a class
driver.
After the driver is downloaded, scan the following code to program the scanner to emulate a
regular RS232-based COM Port.
USB Serial
No extra configuration (e.g., baud rate) is necessary.
Note:
If you scan the USB Serial barcode either with an older Honeywell serial driver, or no driver
installed, you may no longer be able to scan barcodes. If this happens, either uninstall the
older driver versions and install the latest driver or delete the specific device entry in Device
Manager.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off