User's Guide

26 HH1800 User Guide
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
* LED - Good Read On
LED - Good Read Off
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same number of
beeps will be applied to the beeper and LED in response to a good read. For example, if you
program this option to have five beeps, there will be five beeps and five LED flashes in
response to a good read. The beeps and LED flashes are in sync with one another. To change
the number of beeps, scan the barcode below and then scan a digit (1-9) barcode from the
Programming Chart, beginning on page 211, then Save. Default = 1.
Number of Good Read Beeps/LED Flashes
Number of Beeps – Error
The number of beeps and LED flashes emitted by the scanner for a bad read or error can be
programmed from 1 - 9. For example, if you program this option to have five error beeps,
there will be five error beeps and five LED flashes in response to an error. To change the
number of error beeps, scan the barcode below and then scan a digit (1-9) barcode from the
Programming Chart, beginning on page 211, then Save. Default = 1.
Number of Error Beeps/LED Flashes