User's Guide

HH1800 User Guide 49
can include one more timeout at the end of the list. For example, to include a timeout of 1
second for non-sequence codes, use the command
SEQTIM5000FF6000FF7000FF8000FF1000FF.
Satisfactory Subset of Full Sequence
You can define one or more subsets of barcodes from the complete sequence specified by
SEQBLK. When you scan all the codes from one of these subsets, the scanner will transmit all
the codes it has read in the sequence. The scanner sends the codes in the order defined by
SEQBLK.
Note:
To use the satisfactory subset feature, you must supply a timeout for each code in the
sequence using SEQTIM.
Satisfactory Subset of Full Sequence Timeout Example
To specify a subset, list its members using the SEQSAT command and terminate each subset
with FF. The members of each subset are specified as single hex digits corresponding to their
index within the full sequence, 1 being the first. For example, to specify two subsets, the first
consisting of the first and second code in the sequence and the second subset consisting of
the second and third code, use the command SEQSAT12FF23FF.
To define a subset with an odd number of codes, insert a 0 before the final code index. For
example, to define a 3-code subset consisting of the first, second, and third codes, use
thecommand SEQSAT1203FF.
Default Output Sequence
Default Sequence programs the scanner to all universal values. Be certain you want to delete
or clear all formats before you read the Default Sequence symbol.
Default Sequence