User's Guide

HH1800 User Guide 83
Off
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You may either
transmit, or not transmit Start/Stop characters. Default = Don’t Transmit.
Transmit
* Don’t Transmit
Codabar Check Character
Codabar check characters are created using different “modulos.” You can program the
scanner to read only Codabar barcodes with Modulo 16 check characters. Default = No Check
Character.
No Check Character indicates that the scanner reads and transmits barcode data with or
without a check character.
When Check Character is set to Validate and Transmit, the scanner will only read Codabar
barcodes printed with a check character and will transmit this character at the end of the
scanned data.
When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar
barcodes printed with a check character but will not transmit the check character with the
scanned data.
* No Check Character
Validate Modulo 16, but Don’t Transmit
Validate Modulo 16 and Transmit