User manual

Xenon/Granit User Guide 91
Page Pitch
When the scanner is out of the base and you press the Page button, the scanner
associated with that base begins beeping. You can set the pitch of the paging beep
for the scanner by scanning one of the following bar codes. Default = Low.
Linking Sound
Under normal operations, the scanner clicks when linking to a base. If you want to
silence this sound, scan the Silent Linking bar code below. To return to the default
clicking sound, scan Linking Sound. Default = Linking Sound.
Error Indicators
Beeper Pitch - Base Error
The base can be configured to beep at a particular pitch when an error occurs,
such as transmission problems to a host system. The beeper pitch codes modify
the pitch (frequency) of the error tone the base emits when there is an error. Default
= Low.
* Low (1000 Hz)
Medium (3250 Hz)
High (4200 Hz)
* Linking Sound
Silent Linking