User manual

CHAPTER
1
Xenon/Granit User Guide 1
GET STARTED
About This Manual
This User’s Guide provides installation and programming instructions for the
Xenon™ 1900 corded area-imaging scanners, the Xenon 1902 cordless area-imag-
ing scanners, the Granit 1910i and 1980i corded industrial scanners, and the
Granit 1911i and 1981i cordless industrial scanners. Product specifications,
dimensions, warranty, and customer support information are also included.
Honeywell bar code scanners are factory programmed for the most common ter-
minal and communications settings. If you need to change these settings, pro-
gramming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpack Your Device
After you open the shipping carton containing the product, take the following
steps:
• Check for damage during shipment. Report damage immediately to the carrier
who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
Connect the Device
Connect with USB
A scanner or a cordless base can be connected to the USB port of a computer.