User Manual

102 Xenon XP User Guide

User-Specified Aimer Delay

If you want to set your own length for the duration of the delay, scan the bar code

below, then set the time-out by scanning digits (0 - 4,000 ms) from the

Programming Chart, beginning on page 309, then Save.

Aimer Mode

This feature allows you to turn the aimer on and off. When the Interlaced bar code

is scanned, the aimer is interlaced with the illumination LEDs. Default = Interlaced

Centering

Use Centering to narrow the scanner’s field of view to make sure that when the

scanner is hand-held, it reads only those bar codes intended by the user. For

instance, if multiple codes are placed closely together, centering will insure that

only the desired codes are read. (Centering can be used in conjunction with Aimer

Delay, page 101, for the most error-free operation in applications where multiple

codes are spaced closely together. Using the Aimer Delay and Centering features,

the scanner can emulate the operation of older systems, such as linear laser bar

code scanners.)

Note: To adjust centering when the scanner is in a stand, see Presentation Centering (page

4-92).

Delay Duration

Off

* Interlaced