Manualshelf

User Manual

ManualsBrandsHoneywell ManualsBarcode ScannersBarcode Scanner Xenon 1950g SR USB
131132133134135136137138139140
120 Xenon XP User Guide
Number of LED Flashes
If you have silenced the scanner’s beeper, you may set the number of times the
LED flashes when reading bar codes. Default = 1 LED Flash.
Note: If you have set LED Solid (No Flash) (page 121), to anything but Off, that setting will
override the LED Flash settings. In that case, scan the LED Solid Off bar code to turn
off this feature, then scan the LED Flash code you wish to use.
LED Flash Rate
If you have silenced the scanner’s beeper, you may set the how quickly the LED
flashes when reading bar codes. Default = Fast Flash.
* 1 LED Flash
5 LED Flashes
10 LED Flashes
25 LED Flashes
* Fast Flash
Medium Flash
Slow Flash