User Manual

130 Xenon XP User Guide

To remove this delay, scan the Interfunction Delay bar code, then set the number

of delays to 0. Scan the Save bar code from the Programming Chart, beginning on

page 309.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be

placed between each scan transmission. Scan the Intermessage Delay bar code

below, then scan the number of 5ms delays, and the Save bar code from the

Programming Chart, beginning on page 309.

To remove this delay, scan the Intermessage Delay bar code, then set the number

of delays to 0. Scan the Save bar code from the Programming Chart, beginning on

page 309.

2nd Scan Transmission1st Scan Transmission

Intermessage Delay